Stone Cutting Machine

The Most Comprehensive Stone Slab Processing Process

Package

Table of Content

The Most Comprehensive Stone Slab Processing Process

Slab

marble slab

Marble sawing block cutting – (back mesh) – (coarse grinding) – (front squeegee) – polishing (pickling, sandblasting, lychee surface, etc.) – trimming – typesetting (gluing) – Reprocessing – Inspection – Protection – Packaging

curved stone wall panels

Marble composite panel

Marble sawing block cutting – panel, bottom plate trimming (standard specification, extra allowance 8 mm for thickness below 20 mm, extra allowance 15 mm for multi-specification and thickness over 20 mm) – bonding – cross sectioning – Thickness determination (coarse grinding) – front squeegee – polishing (pickling, sandblasting, lychee surface, etc.) – trimming (standard specification, double-knife cutting with thickness below 20 mm, multiple specifications and thickness over 20 mm) Single knife cutting) – typesetting (glue filling) – reprocessing – inspection – protection – packaging

The Most Comprehensive Stone Slab Processing Process

Marble sheet (non-standard specification)

Marble sawing block cutting – double-sided back net – splitting – fixed thickness (coarse grinding) – front squeegee – hand grinding and polishing – trimming – typesetting (gluing) – reprocessing – Inspection – Protection – Packaging

Marble sheet (non-standard specification)

Granite slab

Circular saw (sand saw) block cutting – polishing (fire, axe, lychee surface, sandblasting, etc.) – trimming – typesetting – reprocessing – inspection – protection – packaging

Granite slab

Granite sheet (non-standard specification)

Circular saw block cutting – thickness determination – hand grinding and polishing – trimming – reprocessing – inspection – protection – packaging

Granite sheet (standard size)

Granite sheet (standard size)

Circular saw block cutting – assembly line production – inspection – protection – packaging

Granite sheet (non-standard specification)

Stone slab reprocessing

(1) Backward (cut along the back of the stone according to a certain angle and size) – it can be performed by the edge trimmer.

(2) Upside down (cut along the front side of the stone according to a certain angle and size) – 5*5 and above are performed by edge trimming machine, hand processing and splicing, 5*5 and below are performed by hand processing and need to be polished are performed by hand.

(3) Positive grooving (cut U-shaped, V-shaped or semi-circular grooves on the front edge of the stone according to a certain depth and width or at a certain angle) – the edge trimming machine is performed, and the hand processing is flat and spliced. Manual processing is performed.

(4) Back grooving (cut along the edge on the back of the stone according to a certain depth and width) – the edge trimming machine is performed, and the polishing is performed by hand.

(5) Side polishing (polishing the side of the board) – multiple pieces of the same specification can be polished together by hand grinding, and those with more complex specifications are processed by hand.

(6) Corner cutting (cut on the front of the board according to a certain angle to make the board surface into a specific geometric shape) – the straight line shape is performed by the edge trimmer, and if there is a curved edge, it is performed by hand or water jet.

(7) Hole opening (holes of various geometric shapes are opened on the board surface) – it can be completed by drilling machine, water jet or hand machining according to the needs.

(8) Adhesive edge (in order to make the thickness of the edge of the board compound special requirements, the front or back of the board is pasted along the edge of the long strip) – manual processing execution

(9) Semi-circular edge, 1/4 round edge, duckbill edge, French edge, etc. (specific shapes are processed on the edge of the board according to the special requirements of customers to enhance the decorative effect) – grinding wheel processing with specific shapes – hand processing leveling, splicing, polished

(10) Parquet (using a variety of colors of stone to form a certain plane pattern) – water jet cutting – hand processing, assembling, bonding – hand grinding and polishing

Stone arc panel

Marble arc plate

Barrel saw or wire saw processing blanks – (fixed thickness) – front squeegee – hand-held mill grinding – light (pickling, sandblasting, etc.) – trimmer trimming – typesetting (glue supplement) – Reprocessing – Inspection – Protection – Packaging

Marble arc plate

Granite arc slab

Barrel saw or wire saw processing blanks – (fixed thickness) – hand-held mill polishing (axe chop, fire, sandblasting, etc.) – trimmer trimming – typesetting – reprocessing – inspection – Protection – Packaging

Granite arc slab

stone line

marble straight line

Circular saw or marble pull saw cutting blocks – trimming machine to cut blanks – profiling machine modeling – hand processing splicing and reshaping – (front squeegee) – hand polishing (pickling, sandblasting) etc.) – typesetting (refilling) – trimming machine cutting head – inspection – protection – packaging

marble straight line

Marble curved lines

Circular saw or marble pull saw cutting blocks – trimming machine to cut blanks – hand processing modeling – (front squeegee) – hand processing polishing (pickling, sandblasting, etc.) – typesetting (gluing) ——Edge trimmer cutting head——Inspection——Protection——Packing

Marble curved lines

Granite straight line

Disk saw cutting blocks – edge trimmer cutting blanks – profiling line machine modeling – hand processing splicing and re-modeling – hand processing and polishing (fire, axe, sandblasting, etc.) – edge trimmer cutting head – Inspection – Protection – Packaging

Granite straight line

Granite curved lines

Circular saw cutting blocks – trimming machine cutting blanks – hand processing modeling – hand processing polishing (fire, axe, sandblasting, etc.) – trimming machine cutting head – inspection – protection – Package

Granite curved lines

stone column

marble column

Circular saw cutting blocks – lathe rough turning modeling – surface scraping – lathe polishing (pickling, sandblasting, etc.) – typesetting (glue replenishment) – trimming machine truncation – inspection – protection –Package

Note: Manual machining of surface grooves is performed

marble column

Granite columns

Circular saw cutting blocks – lathe rough turning – lathe polishing (fire, axe, sandblasting, etc.) – trimming machine truncation – inspection – protection – packaging Note: surface grooved hand processing implement

Granite columns

The Entire Processing Process of Stone

Stone shaping

Stone shaping

Stone Cutting Slab

Stone Cutting Slab

Drying Slab

Drying Slab

Fill Hole

fill hole

Slab Reinforcement

Slab Reinforcement

Hanging net on the back

Hanging net on the back

Adhesive on the back net

Adhesive on the back net

polished

polished

Package

Package

warehousing

warehousing

warehousing

warehousing

Machined finished stone slabs

Machined finished stone slabs

Special-shaped processing

Special-shaped processing

Arrangement number

Arrangement number

Arrangement numbera

cleaning inspection

Packing

Packing

send us your inquiry

Scroll to Top
Scroll to Top

STAY IN TOUCH WITH US

Just write down your inquiry details.

×

Hello!

Click our sales below to chat on WhatsApp

× How can I help you?