Stone Cutting Machine

Why Should The Stone Carving Machine Add Water During The Processing?

Why Should The Stone Carving Machine Add Water

Table of Content

Why Should The Stone Carving Machine Add Water During The Processing?

When purchasing a STONE CARVING MACHINE, we must have a detailed understanding of the stone carving machine. Although only in this way can we use it better, we also need to have some methods and methods when choosing so that we can select the stone carving machine that suits us.

1. Please pay attention to the characteristics of the stone carving machine, the spindle power is enormous, and the power is small. Some stone carving machines are only suitable for low-power processing. If the spindle power is too small, it will also affect its application range.
 
2. We need to understand the performance and operation of the stone carving machine. Spindles are critical because spindle motors are usually not covered by warranty because of the long working hours of the spindle. If it fails, it will affect the use of the machine.
 
3. Adjust the spindle speed. If the rate cannot be applied flexibly, it means that the scope of application of the stone carving machine is limited. Now is the time to pay attention.
 
4. The production process of the stone carving body. The body of the high-power carving machine must be precise and stable when it needs to work, so the body must be cast and engraved to ensure its accuracy and stability.
 
5. Ball screws and guide rails are also essential to the stone carving machine. Suitable lead screws and guide rails are necessary to ensure the carving device’s long-term accuracy and performance.
When purchasing, we can consider these points and let us know what aspects should be paid attention to when choosing a stone carving machine so that the mechanical equipment can work better.

The function of adding water to the stone carving machine

Today we will talk about adding water to the stone carving machine. How does it work? You may not know much about this aspect, so you must understand it now to use the device better, give full play to its advantages at work, and improve work efficiency. Let’s take a look.
1. One is to add water to the spindle motor during processing, and the other is to add water to the tool during processing. Standard stone carving machines are double-cooled. On the one hand, the cutting head must be cooled with water during work because the rock is hard. This is also what the sink does.
2. On the other hand, the water-cooled spindle can prevent the spindle temperature from being too high and play a protective role on the spindle. However, if the customer is not careful or does not follow the training steps, anhydrous dry burning will cause severe damage to the machine itself. Therefore, the operator should pay attention to this point when using it. The trainer should also explain this to the operator.

In Conclusion - Why Should The Stone Carving Machine Add Water During The Processing

After understanding the function of adding water to the stone carving machine, we need to pay attention when using it so that we can use it better, and this is also what we need to pay attention to when using it. When choosing a stone carving machine, you can also consult the manufacturer so that we can better understand the equipment itself.
 

send us your inquiry

Scroll to Top

STAY IN TOUCH WITH US

Just write down your inquiry details.